久久精品九九亚洲精品天堂,亚洲国产精品久久久天堂,亚洲中文久久精品无码照片

  • <pre id="klclk"><label id="klclk"><menu id="klclk"></menu></label></pre><track id="klclk"></track>
  • <td id="klclk"><strike id="klclk"></strike></td>
    東光產品 鑄鋼
    FIG.707F鑄鋼伸縮囊截止閥(法蘭型)
    CAST STEEL BELLOWS SEALED GLOBE VALVES - CLASSES 300#
    DESIGN DESCRIPTION:
    Bolted Bonnet / Outside Screw and Yoke Rising Stem and Rising Handwheel
    STANDARDS:
    Steel Valves,ANSI B16.34(API 600)
    Face to Face,End to End,ANSI B16.10
    End Flanges,ANSI B16.5(2"~24")
    Pressure Test,ANSI B16.34,API598,MSS-SP-61
    Available with:
    by-pass,Flanged Drain,Vacuum,Water Seal,Total Enclosed,
    ha2-1.jpg

    Bill of Materials & Parts
    PRAT NO.
    Part Name
    QTY
    ASTM Specifications(Specs.-Grades/Types)
    1-1
    BODY
    1
    A216-WCB
    1-2
    SEAT RING
    1
    STELLITE HARD FACED
    2
    BONNET
    1
    A216-WCB
    3
    DISC
    1
    A216-WCB+H/F 304
    4
    GASKET
    1
    NON ASBESTOS SHEET
    5
    STUB
    1
    A307-B
    6
    NUT
    1
    A194-2H
    7
    HAND WHEEL
    1
    A536
    8
    STEM
    1
    13Cr(410)
    9
    GALND FLANGE
    1
    A216-WCB
    10
    GALND PACKING
    1
    NON ASBESTOS
    11
    BELLOWS
    1
    A216-316
    NOTE: (1)Operated Temp 350℃ Max
    (2)Other Materials Also Available on Requested.
    (3)Tong Kwang Reserves The Right To Change Designs , Materials Or Specifications Without Notice
    DIMENSIONS IN INCHES:
    SIZE
    D
    L
    D1
    H
    1/2
    3.74
    5.98
    5.9
    8.0
    3/4
    4.61
    7.01
    5.9
    9.1
    1
    4.88
    7.99
    7.1
    9.3
    1-1/4
    5.24
    8.50
    7.9
    11.3
    1-1/2
    6.14
    9.02
    8.7
    11.8
    2
    6.50
    10.51
    11.0
    12.5
    2-1/2
    7.50
    11.50
    11.8
    13.0
    3
    8.27
    12.52
    12.6
    15.8
    4
    10.00
    14.02
    13.8
    16.4
    5
    11.00
    15.75
    15.7
    18.4
    6
    12.52
    17.48
    19.7
    20.7
    8
    15.00
    22.01
    21.7
    24.1
    10
    17.52
    24.49
    23.6
    29.5
    12
    20.51
    27.99
    27.6
    32.3
     
    Welcome to TONG KWANG VALVE
    FIG.703F鑄鋼伸縮囊截止閥(法蘭型)
    CAST STEEL BELLOWS SEALED GLOBE VALVES - CLASSES 150
    DESIGN DESCRIPTION:
    Bolted Bonnet / Outside Screw and Yoke Rising Stem and Rising Handwheel
    STANDARDS:
    Steel Valves,ANSI B16.34(API 600)
    Face to Face,End to End,ANSI B16.10
    End Flanges,ANSI B16.5(2"~24")
    Pressure Test,ANSI B16.34,API598,MSS-SP-61
    Available with:
    by-pass,Flanged Drain,Vacuum,Water Seal,Total Enclosed,
    ha1-1.jpg

    Bill of Materials & Parts
    PRAT NO.
    Part Name
    QTY
    ASTM Specifications(Specs.-Grades/Types)
    1-1
    BODY
    1
    A216-WCB
    1-2
    SEAT RING
    1
    STELLITE HARD FACED
    2
    BONNET
    1
    A216-WCB
    3
    DISC
    1
    A216-WCB+H/F 304
    4
    GASKET
    1
    NON ASBESTOS SHEET
    5
    STUB
    1
    A307-B
    6
    NUT
    1
    A194-2H
    7
    HAND WHEEL
    1
    A536
    8
    STEM
    1
    13Cr(410)
    9
    GALND FLANGE
    1
    A216-WCB
    10
    GALND PACKING
    1
    NON ASBESTOS
    11
    BELLOWS
    1
    A216-316
    NOTE: (1)Operated Temp 350℃ Max
    (2)Other Materials Also Available on Requested.
    (3)Tong Kwang Reserves The Right To Change Designs , Materials Or Specifications Without Notice
    DIMENSIONS IN INCHES:
    SIZE
    D
    L
    D1
    H
    1/2
    3.50
    4.25
    5.1
    5.1
    3/4
    3.86
    4.61
    5.1
    5.9
    1
    4.25
    5.00
    5.9
    6.3
    1-1/4
    4.61
    5.51
    7.1
    7.1
    1-1/2
    5.00
    6.50
    7.9
    7.9
    2
    6.00
    7.99
    8.7
    9.1
    2-1/2
    7.00
    8.50
    11.0
    11.4
    3
    7.50
    9.49
    11.8
    12.2
    4
    8.66
    11.50
    12.6
    13.8
    5
    10.00
    14.02
    13.8
    15.7
    6
    11.00
    15.98
    15.7
    18.9
    8
    13.50
    19.49
    19.7
    23.6
    10
    16.00
    24.49
    21.7
    25.6
    12
    19.00
    27.48
    23.6
    29.5
     
    FIG.722B鑄鋼止回閥(對焊型)
    CAST STEEL CHECK VALVES - CLASS 2500# -【PRESSURE SEAL】
    DESIGN DESCRIPTION:
    Pressure Seal Cover / Swing Type For Horizontal or Vertical Lines
     
    STANDARDS:
    Steel Valves,ANSI B16.34(API 600)
    Face to Face,End to End,ANSI B16.10
    Weld Ends,ANSI B16.25
    Pressure Test,ANSI B16.34,API598,MSS-SP-61
    Available with:
    Lever and Weight,Flanged/Buttwelding Ends
     
     
     
    fa6-1.jpg
     
     
     
    SIZE [inch]2 ~4
     
     
     
    DIMENSIONS IN INCHES:
    UNIT:INCH.

    CLASS 2500
    SIZE
    d
    B
    L
     
    H
    WT-1bs
    XXS
    (APPROX.)
    (APPROX.)
    2"
    1.50
    1.503
    17.75
    10.0
    153
    21/2"
    1.87
    1.771
    20.00
    13.0
    223
    3"
    2.25
    2.300
    22.75
    13.5
    280
    4"
    2.87
    3.152
    26.50
    15.0
    450
     
    fa6-2.jpg

    Bill of Materials & Parts
    Part No.
    Part Name
    QTY
    ASTM Specifications(Specs.-Grades/Types)
    A216
    A352
    A217
    A351
    WCB
    LCC
    WC6
    WC9
    C5
    CF8
    CF8M
    1-1
    BODY
    1
    A216-WCB
    A352-LCC
    A217-WC6
    A217-WC9
    A217-C5
    A351-CF8*
    A351-CF8M*
    1-2
    SEAT RING
    1
    STELLITE HARD FACED
    NOTE ( 1 )
    2
    CAP
    1
    @
    3
    DISC
    1
    410 (13 Cr ) / 410 (13 Cr ) + STL#6 / @ + 410 or STL#6
    @ or @ + STL#6
    4
    SWING ARM
    1
    @
    6
    HINGE PIN
    1
    STAINLESS STEEL
    7
    GASKET**
    1
    SOFT IRON+SILVER PLT / GRAPHITE
    A182-F304 / GRAPHITE
    A182-F316 / GRAPHITE
    9
    WASHER
    1
    STAINLESS STEEL
    10
    BUSH
    1
    STAINLESS STEEL
    11
    BEARING BRACKET
    1
    A216-WCB
    12
    PLUNGER
    1
    A276-304
    A276-316
    13
    HINGE PIN GASKET
    1
    SOFT IRON+SILVER PLT / GRAPHITE
    A182-F304 / GRAPHITE
    A182-F316 / GRAPHITE
    14
    HEX.NUT
    1
    A194-8
    A194-8M
    15
    SET PIN
    1
    STAINLESS STEEL
    16
    PIN
    1
    AISI 303
    17
    HEX.NUT
    1
    A194-8
    18
    HEX.NUT
    A/R
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    21
    CAP RETAINER
    1
    @
    NOTE: *(1)Integral Seat (Stellite Hard Faced) (2)Other Materials Also Available on Requested.
    **(3)Graphite Gasket be Used When Standardized by Tong Kwang (4)Tong Kwang Reserves The Right To Change Designs, Materials Or Specifications Without Notice
    (5)STL#6=Stellite (AWS A5.13 ER CoCr-A)
    (7)Mat'l of Hard Faced to be Choose or Requested by Customer @ (6)Equal Body Mat'l Class (Cast or Forged)

    DESIGN DESCRIPTION:
    Pressure Seal Cover / Swing Type For Horizontal or Vertical Lines
     
    STANDARDS:
    Steel Valves,ANSI B16.34(API 600)
    Face to Face,End to End,ANSI B16.10
    Weld Ends,ANSI B16.25
    Pressure Test,ANSI B16.34,API598,MSS-SP-61
    Available with:
    Lever and Weight,Flanged/Buttwelding Ends Oil Buffer Cylinder

    fa6-3.jpg

    SIZE [inch]5 ~12
     
    DIMENSIONS IN INCHES:
    UNIT:INCH.

    CLASS 2500
    SIZE
    d
    B
    L
     
    H
    WT-1bs
    SCH160
    XXS
    (APPROX.)
    (APPROX.)
    5"
    3.62
    -
    4.063
    31.25
    18.0
    920
    6"
    4.37
    -
    4.897
    36.00
    21.0
    1200
    8"
    5.75
    6.813
    -
    40.25
    23.0
    1925
    10"
    7.25
    8.500
    -
    50.00
    25.0
    3250
    12"
    8.62
    10.126
    -
    56.00
    27.0
    4550
     

     
     
     
    fa6-4.jpg
     
     
     

    Bill of Materials & Parts
    Part No.
    Part Name
    QTY
    ASTM Specifications(Specs.-Grades/Types)
    A216
    A352
    A217
    A351
    WCB
    LCC
    WC6
    WC9
    C5
    CF8
    CF8M
    1-1
    BODY
    1
    A216-WCB
    A352-LCC
    A217-WC6
    A217-WC9
    A217-C5
    A351-CF8*
    A351-CF8M*
    1-2
    SEAT RING
    1
    STELLITE HARD FACED
    NOTE ( 1 )
    2
    CAP
    1
    @
    3
    DISC
    1
    410 (13 Cr ) / 410 (13 Cr ) + STL#6 / @ + 410 or STL#6
    @ or @ + STL#6
    4
    SWING ARM
    1
    @
    6
    HINGE PIN
    1
    STAINLESS STEEL
    7
    GASKET***
    1
    SOFT IRON+SILVER PLT / GRAPHITE
    A182-F304 / GRAPHITE
    A182-F316 / GRAPHITE
    9
    WASHER
    1
    STAINLESS STEEL
    10
    BUSH
    1
    STAINLESS STEEL
    12
    PLUNGER
    1
    A276-304
    A276-316
    13
    HINGE PIN GASKET
    1
    SOFT IRON+SILVER PLT / GRAPHITE
    A182-F304 / GRAPHITE
    A182-F316 / GRAPHITE
    14
    HEX.NUT
    1
    A194-8
    A194-8M
    15
    SET PIN
    1
    STAINLESS STEEL
    16
    PIN
    1
    AISI 303
    A276-316
    17
    HEX.NUT
    1
    A194-8
    A194-8M
    18
    CAP BOLT NUT
    A/R
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    19
    CAP BOLT
    A/R
    A193-B7
    A320-L7M
    A193-B7/A193-B16**
    A193-B7+Zn PLT
    21
    CAP RETAINER COVER
    1
    @
    22
    SPACER RING
    1
    A182-F6a
    23
    RETAINER RING
    1
    A182-F6a
    24
    EYE BOLT
    1
    A181
    304
    NOTE: *(1)Integral Seat (Stellite Hard Faced) (2)Other Materials Also Available on Requested.
    **(3)Graphite Gasket be Used When Standardized by Tong Kwang (4)Tong Kwang Reserves The Right To Change Designs, Materials Or Specifications Without Notice
    (5)STL#6=Stellite (AWS A5.13 ER CoCr-A)
    (7)Mat'l of Hard Faced to be Choose or Requested by Customer @ (6)Equal Body Mat'l Class (Cast or Forged)
     
    FIG.721B鑄鋼止回閥(對焊型)
    CAST STEEL CHECK VALVES - CLASS 1500# -【PRESSURE SEAL】
    DESIGN DESCRIPTION:
    Pressure Seal Cover / Swing Type For Horizontal or Vertical Lines
     
    STANDARDS:
    Steel Valves,ANSI B16.34(API 600)
    Face to Face,End to End,ANSI B16.10
    Weld Ends,ANSI B16.25
    Pressure Test,ANSI B16.34,API598,MSS-SP-61
    Available with:
    Lever and Weight,Flanged/Buttwelding Ends Oil Buffer Cylinder
     
     
     
    fa5-1.jpg
     
     
     
    SIZE [inch]2 ~4
     
     
     
    DIMENSIONS IN INCHES:
    UNIT:INCH.

    CLASS 1500
    SIZE
    d
    B
    L
     
    H
    WT-1bs
    SCH160
    (APPROX.)
    (APPROX.)
    2"
    1.87
    1.687
    14.50
    10.0
    153
    21/2"
    2.25
    2.125
    16.50
    13.0
    223
    3"
    2.75
    2.624
    18.50
    13.5
    256
    4"
    3.62
    3.438
    21.50
    15.0
    425
     
    fa5-2.jpg

    Bill of Materials & Parts
    Part No.
    Part Name
    QTY
    ASTM Specifications(Specs.-Grades/Types)
    A216
    A352
    A217
    A351
    WCB
    LCC
    WC6
    WC9
    C5
    CF8
    CF8M
    1-1
    BODY
    1
    A216-WCB
    A352-LCC
    A217-WC6
    A217-WC9
    A217-C5
    A351-CF8*
    A351-CF8M*
    1-2
    SEAT RING
    1
    STELLITE HARD FACED
    NOTE ( 1 )
    2
    CAP
    1
    @
    3
    DISC
    1
    410 (13 Cr ) / 410 (13 Cr ) + STL#6 / @ + 410 or STL#6
    @ or @ + STL#6
    4
    SWING ARM
    1
    @
    6
    HINGE PIN
    1
    STAINLESS STEEL
    7
    GASKET**
    1
    SOFT IRON+SILVER PLT / GRAPHITE
    A182-F304 / GRAPHITE
    A182-F316 / GRAPHITE
    9
    WASHER
    1
    STAINLESS STEEL
    10
    BUSH
    1
    STAINLESS STEEL
    12
    PLUNGER
    1
    A276-304
    A276-316
    13
    HINGE PIN GASKET
    2
    SOFT IRON+SILVER PLT / GRAPHITE
    A182-F304 / GRAPHITE
    A182-F316 / GRAPHITE
    14
    HEX.NUT
    1
    A194-8
    A194-8M
    15
    SET PIN
    1
    STAINLESS STEEL
    16
    PIN
    1
    AISI 303

    A276-316

    17
    HEX.NUT
    1
    A194-8

    A194-8M

    18
    HEX.NUT
    A/R
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    21
    CAP RETAINER
    1
    @
    NOTE: *(1)Integral Seat (Stellite Hard Faced) (2)Other Materials Also Available on Requested.
    **(3)Graphite Gasket be Used When Standardized by Tong Kwang (4)Tong Kwang Reserves The Right To Change Designs, Materials Or Specifications Without Notice
    (5)STL#6=Stellite (AWS A5.13 ER CoCr-A)
    (7)Mat'l of Hard Faced to be Choose or Requested by Customer @ (6)Equal Body Mat'l Class (Cast or Forged)

    DESIGN DESCRIPTION:
    Pressure Seal Cover / Swing Type For Horizontal or Vertical Lines
     
    STANDARDS:
    Steel Valves,ANSI B16.34(API 600)
    Face to Face,End to End,ANSI B16.10
    Weld Ends,ANSI B16.25
    Pressure Test,ANSI B16.34,API598,MSS-SP-61
    Available with:
    Lever and Weight,Flanged/Buttwelding Ends Oil Buffer Cylinder

    fa5-3.jpg

    SIZE [inch]5 ~12
     
    DIMENSIONS IN INCHES:
    UNIT:INCH.

    CLASS 1500
    SIZE
    d
    B
    L
     
    H
    WT-1bs
    SCH160
    (APPROX.)
    (APPROX.)
    5"
    4.37
    4.313
    26.50
    18.0
    880
    6"
    5.37
    5.187
    27.75
    21.0
    1056
    8"
    7.00
    6.813
    32.75
    23.0
    1760
    10"
    8.75
    8.500
    39.00
    25.0
    3030
    12"
    10.37
    10.126
    44.50
    27.0
    4310
     

     
     
     
    fa5-4.jpg
     
     
     

    Bill of Materials & Parts
    Part No.
    Part Name
    QTY
    ASTM Specifications(Specs.-Grades/Types)
    A216
    A352
    A217
    A351
    WCB
    LCC
    WC6
    WC9
    C5
    CF8
    CF8M
    1-1
    BODY
    1
    A216-WCB
    A352-LCC
    A217-WC6
    A217-WC9
    A217-C5
    A351-CF8*
    A351-CF8M*
    1-2
    SEAT RING
    1
    STELLITE HARD FACED
    NOTE ( 1 )
    2
    CAP
    1
    @
    3
    DISC
    1
    410 (13 Cr ) / 410 (13 Cr ) + STL#6 / @ + 410 or STL#6
    @ or @ + STL#6
    4
    SWING ARM
    1
    @
    6
    HINGE PIN
    1
    STAINLESS STEEL
    7
    GASKET**
    1
    SOFT IRON+SILVER PLT / GRAPHITE
    A182-F304 / GRAPHITE
    A182-F316 / GRAPHITE
    9
    WASHER
    1
    STAINLESS STEEL
    10
    BUSH
    1
    STAINLESS STEEL
    12
    PLUNGER
    1
    A276-304
    A276-316
    13
    HINGE PIN GASKET
    1
    SOFT IRON+SILVER PLT / GRAPHITE
    A182-F304 / GRAPHITE
    A182-F316 / GRAPHITE
    14
    HEX.NUT
    1
    A194-8
    A194-8M
    15
    SET PIN
    1
    STAINLESS STEEL
    16
    PIN
    1
    AISI 303
    A276-316
    17
    HEX.NUT
    1
    A194-8
    A194-8M
    18
    CAP BOLT NUT
    A/R
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    19
    CAP BOLT
    A/R
    A193-B7
    A320-L7M
    A193-B7/A193-B16*
    A193-B7+Zn PLT
    21
    CAP RETAINER COVER
    1
    @
    22
    SPACER RING
    1
    A182-F6a
    23
    RETAINER RING
    1
    A182-F6a
    24
    EYE BOLT
    1
    A181
    304
    NOTE: *(1)Integral Seat (Stellite Hard Faced) (2)Other Materials Also Available on Requested.
    **(3)Graphite Gasket be Used When Standardized by Tong Kwang (4)Tong Kwang Reserves The Right To Change Designs, Materials Or Specifications Without Notice
    (5)STL#6=Stellite (AWS A5.13 ER CoCr-A)
    (7)Mat'l of Hard Faced to be Choose or Requested by Customer @ (6)Equal Body Mat'l Class (Cast or Forged)
     
    FIG.702B鑄鋼截止閥(對焊型)
    CAST STEEL GLOBE VALVES- CLASS 2500# -【PRESSURE SEAL】
    DESIGN DESCRIPTION:
    Pressure Seal Bonnet / Outside Screw and Yoke Loose & Rotated Plug Disc Rising Stem and Rising Handwheel
     
    STANDARDS:
    Steel Valves,ANSI B16.34,API 600
    Face to Face,End to End,ANSI B16.10
    End Flanges,ANSI B16.5
    Weld Ends,ANSI B16.25
    Pressure Test,ANSI B16.34,API598,MSS-SP-61
    Available with:
    by-pass,Flanged/Buttwelding Ends Drain,Vacuum,Water Seal,Total Enclosed,(Gear,Motor,Chain,Pneumatic/Hydraulic)Operated
     
     
     
    fa4-1.jpg
     
     
     
    SIZE [inch]2 ~4
     
     
     
    DIMENSIONS IN INCHES:
    UNIT:INCH.

    CLASS 2500
    SIZE
    d
    B
    L
    D1
    H
    H1
    H2
    WT-1bs
    XXS
    (CLOSE)
    (OPEN)
    B/G
    (APPROX.)
    2"
    1.50
    1.503
    17.75
    20.0
    28.5
    30.0
    -
    230
    21/2"
    1.87
    1.771
    20.00
    20.0
    30.3
    32.0
    -
    425
    3"
    2.25
    2.300
    22.75
    24.0
    36.0
    38.5
    42.3
    740
    4"
    2.87
    3.152
    26.50
    27.0
    50.5
    53.0
    57.3
    1680

     
    fa4-2.jpg
    SIZE [inch]2 ~4

    Bill of Materials & Parts
    Part No.
    Part Name
    QTY
    ASTM Specifications(Specs.-Grades/Types)
    A216
    A352
    A217
    A351
    WCB
    LCC
    WC6
    WC9
    C5
    CF8
    CF8M
    1
    BODY(SEAT)*
    1
    A216-WCB
    A352-LCC
    A217-WC6
    A217-WC9
    A217-C5
    A351-CF8
    A351-CF8M
    2
    BONNET(BUSH)
    1
    @ + HARD FACED 410 or STL#6
    @ or @ + STL#6
    3
    DISC
    1
    13Cr ( 410 ) or 13Cr ( 410 ) + STL#6
    304 or 304 + STL#6
    316 or 316 + STL#6
    @ + HARD FACED 410 or STL#6
    @ or @ + STL#6
    4
    GLAND FLANGE
    1
    A216-WCB
    A351-CF8
    6
    HAND WHEEL
    1
    A536
    7
    GASKET***
    1
    SOFT IRON + SILVER PLT / GRAPHITE
    A182-F304/GRAPHITE
    A182-F316/GRAPHITE
    9
    STEM
    1
    13Cr ( 410 )
    A564-630+Cr PLT
    11
    GLAND
    1
    STAINLESS STEEL
    12
    GLAND PACKING
    A/R
    NON ASBESTOS (GRAPHITE)
    13
    PACKING RING
    1
    STAINLESS STEEL
    14
    EYE BOLT PIN
    2
    A276-410
    15
    YOKE SLEEVE
    1
    A439-D2
    16
    DISC NUT
    1
    A276-410
    A276-304
    A276-316
    17
    POUNDING RECEIVER
    1
    A536
    18
    POUNDING RECEIVER COVER
    1
    A36
    19
    STEM WASHER
    1
    A276-410
    A564-630
    20
    HEX.BOLT
    A/R
    A193-B7
    A320-L7M
    A193-B7/A193-B16**
    A193-B7+Zn PLT
    21
    HAND WHEEL NUT
    1
    A536/A36
    22
    YOKE
    1
    A216-WCB
    23
    BONNET RETAINER COVER
    1
    A216-WCB
    24
    SPACER RING
    1
    A182-F6a
    25
    RETAINER RING
    1
    A182-F6a
    26
    BODY/YOKE CLAMP
    1
    A216-WCB
    28
    WASHER
    1
    A176-430
    29
    YOKE SLEEVE NUT
    1
    A36 / A536
    30
    CLAMP BOLT
    2
    A193-B7
    A320-L7M
    A193-B7
    A193-B7+Zn PLT
    31
    CLAMP BOLT NUT
    4
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    32
    EYE BOLT
    2
    A193-B7
    A320-L7M
    A193-B7
    A193-B7+Zn PLT
    33
    HEX.NUT
    2
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    34
    NIPPLE
    1
    CARBON STEEL
    35
    TORQUE KEY
    1
    13Cr (410) / A564-630
    36
    TORQUE KEY SCREW
    1
    A276-410
    37
    TRUST BALL BEARING
    1
    A295
    NOTE: *(1)Integral Seat (Stellite Hard Faced) (2)Other Materials Also Available on Requested.
    **(3)Used Above 540℃(1000℉) or Requested by Customer (4)Tong Kwang Reserves The Right To Change Designs, Materials Or Specifications Without Notice
    ***(5)Graphite Gasket be Used When Standardized by Tong Kwang Or Requested by Customer (6)STL#6=Stellite (AWS A5.13 ER CoCr-A)
    (7)Mat'l of Hard Faced to be Choose or Requested by Customer @ (8)Equal Body Mat'l Class (Cast or Forged)


    DESIGN DESCRIPTION:
    Pressure Seal Bonnet / Outside Screw and Yoke Loose & Rotated Plug Disc Rising Stem and Rising Handwheel
     
    STANDARDS:
    Steel Valves,ANSI B16.34,API 600
    Face to Face,End to End,ANSI B16.10
    End Flanges,ANSI B16.5
    Weld Ends,ANSI B16.25
    Pressure Test,ANSI B16.34,API598,MSS-SP-61
    Available with:
    by-pass,Flanged/Buttwelding Ends Drain,Vacuum,Water Seal,Total Enclosed,(Gear,Motor,Chain,Pneumatic/Hydraulic)Operated

    fa4-3.jpg

    SIZE [inch]5 ~12
     
    DIMENSIONS IN INCHES:
    UNIT:INCH.

    CLASS 2500
    SIZE
    d
    B
    L
    D1
    H
    H1
    H2
    WT-1bs
    SCH
    XXS
    (CLOSE)
    (OPEN)
    B/G
    (APPROX.)
    5"
    3.62
    -
    4.063
    31.25
    22.0
    32.7
    35.6
    40.2
    620
    6"
    4.37
    -
    4.897
    36.00
    26.0
    37.2
    40.4
    43.2
    1098
    8"
    5.75
    6.813
    -
    40.25
    26.0
    41.2
    44.8
    48.1
    1585
    10"
    7.25
    8.500
    -
    50.00
    30.0
    50.4
    54.2
    58.1
    2450
    12"
    8.62
    10.126
    -
    56.00
    30.0
    61.2
    65.7
    69.3
    2880

     
    fa4-4.jpg

    SIZE [inch]5 ~12
    Bill of Materials & Parts
    Part No.
    Part Name
    QTY
    ASTM Specifications(Specs.-Grades/Types)
    A216
    A352
    A217
    A351
    WCB
    LCC
    WC6
    WC9
    C5
    CF8
    CF8M
    1
    BODY(SEAT)*
    1
    A216-WCB
    A352-LCC
    A217-WC6
    A217-WC9
    A217-C5
    A351-CF8
    A351-CF8M
    2
    BONNET (BUSH)
    1
    @ + HARD FACED 410 or STL#6
    @ or @ + STL#6
    3
    DISC
    1
    13Cr ( 410 ) or 13Cr ( 410 ) + STL#6
    304 or 304 + STL#6
    316 or 316 + STL#6
    @ + HARD FACED 410 or STL#6
    @ or @ + STL#6
    4
    GLAND FLANGE
    1
    A216-WCB
    A351-CF8
    6
    HAND WHEEL
    1
    A536
    7
    GASKET***
    1
    SOFT IRON + SILVER PLT / GRAPHITE
    A182-F304 / GRAPHITE
    A182-F316/GRAPHITE
    9
    STEM
    1
    13 Cr (410)
    A564-630+Cr PLT
    11
    GLAND
    1
    STAINLESS STEEL
    12
    GLAND PACKING
    A/R
    NON ASBESTOS ( GRAPHITE )
    13
    PACKING RING
    1
    STAINLESS STEEL
    15
    YOKE SLEEVE
    1
    A439-D2
    16
    DISC NUT
    1
    A276-410
    A276-304
    A276-316
    19
    STEM WASHER
    1
    A276-410
    A276-304
    A276-316
    20
    HEX.BOLT
    A/R
    A193-B7
    A320-L7M
    A193-B7 / A193-B16**
    A193-B7+Zn PLT
    21
    HAND WHEEL NUT
    1
    A194-2H
    22
    YOKE
    1
    A216-WCB
    23
    BONNET RETAINER COVER
    1
    A216-WCB / A36
    24
    SPACER RING
    1
    A182-F6a
    25
    RETAINER RING
    1
    A182-F6a
    26
    BODY/YOKE CLAMP
    1
    A216-WCB
    28
    WASHER
    1
    A176-430
    29
    YOKE SLEEVE NUT
    1
    A36-A536
    30
    CLAMP BOLT
    2
    A193-B7
    A320-L7M
    A193-B7
    A193-B7+Zn PLT
    31
    CLAMP BOLT NUT
    4
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    32
    EYE BOLT
    2
    A193-B7
    A320-L7M
    A193-B7
    A193-B7+Zn PLT
    33
    HEX.NUT
    2
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    34
    NIPPLE
    1
    CARBON STEEL
    35
    TORQUE KEY
    1
    13Cr (410) / A564-630
    36
    TORQUE KEY SCREW
    1
    A276-410
    37
    TRUST BALL BEARING
    1
    A295
    39
    HEX.BOLT
    A/R
    A 325
    40
    SPRING WASHER
    A/R
    A510-1060
    41
    BEVEL GEAR BRACKETS
    A/R
    A536/A216-WCB
    42
    POUNDING RECEIVER
    1
    A536
    43
    BEVEL GEAR
    1
    A536
    44
    HEX SOCKET HEAD CAP SCREWS
    A/R
    A193-B7
    46
    HEX.BOLT
    A/R
    A193-B7
    NOTE: *(1)Integral Seat (Stellite Hard Faced) (2)Other Materials Also Available on Requested.
    **(3)Used Above 540℃(1000℉) or Requested by Customer (4)Tong Kwang Reserves The Right To Change Designs, Materials Or Specifications Without Notice
    ***(5)Graphite Gasket be Used When Standardized by Tong Kwang Or Requested by Customer (6)STL#6=Stellite (AWS A5.13 ER CoCr-A)
    (7)Mat'l of Hard Faced to be Choose or Requested by Customer @ (8)Equal Body Mat'l Class (Cast or Forged)
     


    頁1 共4頁
    久久精品九九亚洲精品天堂,亚洲国产精品久久久天堂,亚洲中文久久精品无码照片