久久精品九九亚洲精品天堂,亚洲国产精品久久久天堂,亚洲中文久久精品无码照片

  • <pre id="klclk"><label id="klclk"><menu id="klclk"></menu></label></pre><track id="klclk"></track>
  • <td id="klclk"><strike id="klclk"></strike></td>
    東光產品 鑄鋼
    Welcome to TONG KWANG VALVE
    FIG.766F,766B / 769F,769B鑄鋼閘閥(法蘭型,對焊型)
    CAST STEEL GATE VALVES - CLASSES 600# / 900#
    DESIGN DESCRIPTION:
    Bolted Bonnet / Outside Screw and Yoke Flexible Wedge,Rising Stem and Non-Rising Handwheel
    STANDARDS:
    Steel Gate Valves,API 600 Steel Valves,ANSI B16.34 Face to Face,End to End,ANSI B16.10 End Flanges,ANSI B16.5(2"~24"),API 605(26"~36") Weld Ends,ANSI B16.25 Pressure Test,ANSI B16.34,API598, MSS-SP-61
    Available with:
    by-pass,Balance,Flanged/Buttwelding Ends Drain,Vacuum,Water Seal,Total Enclosed,(Gear,Motor,Chain,Pneumatic/Hydraulic)Operated
    bb2-1.jpg
    bb2-3.jpg
    600# 6" ~ 12" & 900# 5" ~ 8"
    bb2-2.jpg
    bb2-4.jpg
    600# 14" & 900# 10" And Larger ( Gear Operated )
    600# 12" & 900# 8" And Small ( Optional Gear Operated )
    Round Bonnet With Integral Bonnet ( But 14" and Larger are Separated )

    DIMENSIONS IN INCHES:
    UNIT:INCH
    CLASS 600
    SIZE
    D
    L
    L1
    D1
    H(CLOSE)
    H1(OPEN)
    B/G
    WT(APPROX.)lbs
    H2
    FLANGE
    BUTTWELDIN
    2"
    6.50
    11.50
    11.50
    10.0
    17.4
    20.1
    -
    97
    79
    21/2"
    7.50
    13.00
    13.00
    10.0
    18.7
    21.8
    -
    132
    120
    3"
    8.25
    14.00
    14.00
    12.0
    19.8
    23.4
    -
    176
    152
    4"
    10.75
    17.00
    17.00
    14.0
    23.4
    28.0
    29.2
    320
    270
    5"
    13.00
    20.00
    20.00
    16.0
    26.7
    32.5
    33.5
    520
    430
    6"
    14.00
    22.00
    22.00
    20.0
    32.2
    39.2
    40.0
    680
    580
    8"
    16.50
    26.00
    26.00
    24.0
    36.7
    45.6
    45.8
    1150
    1020
    10"
    20.00
    31.00
    31.00
    27.0
    43.1
    54.1
    54.5
    1715
    1430
    12"
    22.00
    33.00
    33.00
    27.0
    50.1
    63.1
    64.0
    2440
    1950
    14"
    23.75
    35.00
    35.00
    -
    58.0
    76.0
    77.2
    3310
    2820
    16"
    27.00
    39.00
    39.00
    -
    65.3
    80.0
    83.4
    4270
    3570
    18"
    29.25
    43.00
    43.00
    -
    73.5
    90.0
    83.4
    6020
    4460
    20"
    32.00
    47.00
    47.00
    -
    83.3
    102.0
    83.4
    7080
    5780
    22"
    34.25
    51.00
    51.00
    -
    93.0
    112.5
    83.4
    8100
    7020
    24"
    37.00
    55.00
    55.00
    -
    100.0
    123.0
    83.4
    9200
    7900
    CLASS 900
    SIZE
    D
    L
    L1
    D1
    H(CLOSE)
    H1(OPEN)
    B/G
    WT(APPROX.)lbs
    H2
    FLANGE
    BUTTWELDIN
    2"
    8.50
    14.50
    14.50
    12.0
    21.6
    22.6
    -
    135
    125
    21/2"
    9.62
    16.50
    16.50
    15.0
    22.2
    24.8
    -
    175
    155
    3"
    9.50
    15.00
    15.00
    16.0
    23.7
    26.0
    -
    255
    213
    4"
    11.50
    18.00
    18.00
    20.0
    27.8
    30.6
    31.8
    453
    396
    5"
    13.75
    22.00
    22.00
    24.0
    29.7
    33.5
    35.0
    655
    550
    6"
    15.00
    24.00
    24.00
    24.0
    33.2
    41.0
    42.0
    913
    807
    8"
    18.50
    29.00
    29.00
    27.0
    37.0
    45.5
    46.5
    1705
    1465
    10"
    21.50
    33.00
    33.00
    -
    44.2
    54.4
    55.8
    2387
    1724
    12"
    24.00
    38.00
    38.00
    -
    51.5
    64.5
    66.0
    3600
    2790
    14"
    25.25
    40.50
    40.50
    -
    59.6
    76.8
    77.8
    4900
    4150
    16"
    27.75
    44.50
    44.50
    -
    66.2
    82.2
    83.4
    5860
    5000
    18"
    31.00
    48.00
    48.00
    -
    75.0
    92.5
    83.4
    6880
    5960
    20"
    33.75
    52.00
    52.00
    -
    83.8
    113.1
    83.4
    7900
    6920
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    24"
    41.00
    61.00
    61.00
    -
    101.4
    123.4
    83.4
    9940
    8840

    ?

    NOTE : Dimension Of R/J Type Refer To The Special Features..

    bb2-5.jpg

    Bill of Materials & Parts
    Part No.
    Part Name
    QTY
    ASTM Specifications(Specs.-Grades/Types)
    A216
    A352
    A217
    A351
    WCB
    LCC
    WC6
    WC9
    C5
    CF8
    CF8M
    1-1
    BODY
    1
    A216-WCB
    A352-LCC
    A217-WC6
    A217-WC9
    A217-C5
    A351-CF8+STL**
    A351-CF8M+STL**
    1-2
    WEDGE
    2"~3"
    1
    13Cr ( 410 )
    304
    /A351-CF8
    316
    /A351-CF8M
    ≧4"
    A216-WCB+410
    A352-LCC+410
    A217-WC6+410
    A217-WC9+410
    A217-C5+410
    1-3
    SEAT RING
    2
    STELLITE HARD FACED
    2
    BONNET
    1
    A216-WCB
    A352-LCC
    A217-WC6
    A217-WC9
    A217-C5
    A351-CF8
    A351-CF8M
    4
    GLAND FLANGE
    1
    A216-WCB
    A352-LCC
    A217-WC6
    A217-WC9
    A217-C5
    A351-CF8M
    6
    HAND WHEEL
    1
    A536
    7
    GASKET
    1
    SOFT IRON
    A182-F304 A182-F316
    9
    STEM
    1
    13Cr ( 410 )
    304
    316
    10
    BONNET BUSH
    1
    13Cr ( 410 )
    NOTE ( 2 )
    11
    GLAND
    1
    STAINLESS STEEL
    12
    GLAND PACKING
    A/R
    NON ASBESTOS
    13
    PACKING RING
    1
    STAINLESS STEEL
    14
    EYE BOLT PIN
    2
    A276-410
    A276-304
    15
    YOKE SLEEVE
    1
    A439-D2
    16
    YOKE SLEEVE NUT
    1
    A36 / A276-410
    18
    HAND WHEEL NUT
    1
    A536 / A36
    19
    BONNET BOLT NUT
    A/R
    A194-2H
    A194-7M
    A194-7
    A194-6
    20
    BONNET BOLT
    A/R
    A193-B7
    A320-L7M
    A193-B7 / A193-B16*
    A193-B6
    21
    EYE BOLT NUT
    2
    A194-2H
    A194-7M
    A194-2H
    A194-8
    22
    EYE BOLT
    2
    A193-B7
    A320-L7M
    A193-B7
    A193-B8
    NOTE :
    (1)*Used Above 540℃(1000℉) or Requested by Customer (2)**Integral Seat ( Stainless. Steel )
    (3)Other Materials Also Available on Requested. (4)Tong Kwang Reserves The Right To Change Designs, Materials Or Specifications Without Notice
     
    FIG.760F鑄鋼直通式閘閥(法蘭型)
    CAST STEEL THROUGH CONDUIT GATE VALVES-CLASS 300#
    SIZE [inch]:2 ~30

    PARTS AND MATERIAL LIST
    Part No.
    Part Name
    QTY
    MATERIALS
    1
    BODY
    1
    A216-WCB
    2
    BONNET
    1
    A216-WCB
    3
    DISC PLATE
    1
    A36+MOS2 COATING
    4
    GLAND FLANGE
    1
    A216-WCB+A53
    5-1
    SEAT RING
    2
    A182-F6a CL-2
    5-2
    SEAT INSERT
    2
    PTFE
    6
    HAND WHEEL
    1
    A536
    7
    GASKET
    1
    PTFE+304 SPIRAL WOUND
    9
    STEM
    1
    A182-F6a CL-2
    10
    BONNET BUSH
    1
    A276-410
    11
    GLAND
    1
    A276-410
    13
    PACKING RING
    1
    A276-410
    14
    EYE BOLT PIN
    2
    A36
    15
    YOKE SLEEVE
    1
    A439-D2
    16
    YOKE SLEEVE NUT
    1
    A36
    18
    HAND WHEEL NUT
    1
    A36
    19
    PACKING
    1
    PTFE OR V# 7233
    21
    ENCLOSURE TUBE
    1
    CARBON STEEL
    23
    PLUG
    1
    A276-410
    24
    BONNET BOLT NUT
    A/R
    A194-2H
    25
    BONNET BOLT
    A/R
    A193-B7
    27
    STOPPER
    1
    A36
    28
    EYE BOLT NUT
    2
    A194-2H
    29
    EYE BOLT
    2
    A307-B
    32
    INDICATOR
    1
    A276-304
    33
    DISC GUIDE
    1
    A240-304
    35
    O RING
    4
    VITON
    36
    ENCLOSURE
    1
    A36+A53
    37
    GREASE INJECTOR
    3
    A108-1025
    38
    RELIEF VALVE
    1
    A276-410
    Design & Test STD. : API 6D

    bb10-1.jpg

    DIMENSIONS IN INCHES:
    UNIT:INCH.

    CLASS 300
    SIZE
    2
    2 1/2
    3
    4
    6
    8
    10
    12
    14
    16
    18
    20
    24
    26
    28
    30
    D
    6.50
    7.50
    8.25
    10.00
    12.50
    15.00
    17.50
    20.50
    23.00
    25.50
    28.00
    30.50
    36.00
    34.12
    36.25
    39.00
    L
    8.50
    9.50
    11.12
    12.00
    15.88
    16.50
    18.00
    19.75
    30.00
    33.00
    36.00
    39.00
    45.00
    49.00
    53.00
    55.00
    L1
    8.50
    9.50
    11.12
    12.00
    15.88
    16.50
    18.00
    19.75
    30.00
    33.00
    36.00
    39.00
    45.00
    49.00
    53.00
    55.00
    H (OPEN)
    21.50
    23.50
    28.00
    35.50
    47.00
    57.50
    68.92
    78.00
    87.00
    95.00
    110.00
    120.50
    142.00
    152.00
    161.50
    171.00
    H1(CLOSE)
    18.50
    21.00
    24.00
    30.50
    40.00
    48.50
    57.76
    67.50
    71.50
    78.50
    90.50
    99.50
    117.50
    125.00
    132.50
    140.00
    F
    5.00
    6.00
    7.50
    8.00
    12.00
    15.00
    19.29
    22.00
    24.50
    28.00
    32.50
    35.50
    42.00
    44.50
    47.50
    50.50
    D1
    8
    8
    10
    10
    12
    16
    18
    20
    18
    18
    18
    24
    24
    30
    30
    30
    NOTE : (1)Other Materials Also Available on Requested.
    (2)Tong Kwang Reserves The Right To Change Designs , Materials or Specifications Without Notice.
     
    FIG.764F,764B / 765F,765B鑄鋼閘閥(法蘭型,對焊型)
    CAST STEEL GATE VALVES - CLASSES 150# / 300#
    DESIGN DESCRIPTION:
    Bolted Bonnet / Outside Screw and Yoke Flexible Wedge,Rising Stem and Non-Rising Handwheel
    STANDARDS:
    Steel Gate Valves,API 600 Steel Valves,ANSI B16.34 Face to Face,End to End,ANSI B16.10 End Flanges,ANSI B16.5(2"~24"),API 605(26"~36") Weld Ends,ANSI B16.25 Pressure Test,ANSI B16.34,API598, MSS-SP-61
    Available with:
    by-pass,Balance,Flanged/Buttwelding Ends Drain,Vacuum,Water Seal,Total Enclosed,'(Gear,Motor,Chain,Pneumatic/Hydraulic)Operated
    bb1-1.jpg
    bb1-3.jpg
    bb1-2.jpg
    150# 26" & 300# 26" And Larger
    ( Gear Operated )
    150# 24" & 300# 24" And Small
    ( Optional Gear Operated )
    Oval Bonnet With Integral Yoke ( But 14" and Larger are Separated )

    Class 150
    Round Bonnet With Integral Yoke ( But 12" and Larger are Separated )

    Class 300
    DIMENSIONS IN INCHES:
    UNIT:INCH
    CLASS 150
    SIZE
    D
    L
    L1
    D1
    H(CLOSE)
    H1(OPEN)
    B/G
    WT(APPROX.)lbs
    H2
    FLANGE
    BUTTWELDING
    2"
    6.00
    7.00
    8.50
    8.0
    13.2
    15.7
    -
    46
    40
    21/2"
    7.00
    7.50
    9.50
    8.0
    14.1
    17.1
    -
    56
    46
    3"
    7.50
    8.00
    11.12
    8.0
    15.3
    18.8
    -
    71
    58
    4"
    9.00
    9.00
    12.00
    10.0
    18.9
    23.4
    -
    111
    91
    5"
    10.00
    10.00
    15.00
    13.0
    22.5
    28.1
    -
    163
    152
    6"
    11.00
    10.50
    15.88
    14.0
    24.8
    31.5
    -
    196
    180
    8"
    13.50
    11.50
    16.50
    16.0
    30.7
    39.4
    40.6
    289
    259
    10"
    16.00
    13.00
    18.00
    18.0
    36.4
    47.2
    47.9
    449
    425
    12"
    19.00
    14.00
    19.75
    20.0
    42.2
    55.0
    55.8
    639
    584
    14"
    21.00
    15.00
    22.50
    22.0
    46.9
    61.1
    62.6
    860
    811
    16"
    23.50
    16.00
    24.00
    24.0
    52.7
    68.9
    70.2
    1190
    1146
    18"
    25.00
    17.00
    26.00
    27.0
    58.6
    76.8
    78.8
    1389
    1349
    20"
    27.50
    18.00
    28.00
    30.0
    65.1
    85.5
    86.6
    1786
    1720
    22"
    29.50
    20.00
    30.00
    30.0
    72.2
    94.6
    96.0
    2110
    2060
    24"
    32.00
    20.00
    32.00
    30.0
    76.9
    101.4
    102.6
    2601
    2534
    26"
    30.94
    22.00
    22.00*
    -
    82.2
    108.7
    109.9
    3720
    3489
    28"
    32.94
    24.00
    24.00*
    -
    87.6
    116.1
    117.5
    4110
    3900
    30"
    34.94
    24.00
    24.00*
    -
    93.8
    124.2
    125.2
    4466
    4037
    32"
    37.06
    28.00
    28.00*
    -
    98.2
    131.7
    133.0
    4650
    4200
    36"
    41.62
    28.00
    28.00*
    -
    110.2
    146.7
    148.0
    4850
    4385
    CLASS 300
    SIZE
    D
    L
    L1
    D1
    H(CLOSE)
    H1(OPEN)
    B/G
    WT(APPROX.)lbs
    H2
    FLANGE
    BUTTWELDING
    2"
    6.50
    8.50
    8.50
    8.0
    15.2
    17.7
    -
    64
    51
    21/2"
    7.50
    9.50
    9.50
    10.0
    16.1
    19.1
    -
    88
    68
    3"
    8.25
    11.12
    11.12
    10.0
    17.2
    20.7
    -
    112
    86
    4"
    10.00
    12.00
    12.00
    12.0
    20.3
    24.8
    -
    175
    154
    5"
    11.00
    15.00
    15.00
    15.0
    23.9
    29.6
    -
    258
    207
    6"
    12.50
    15.88
    15.88
    16.0
    26.8
    33.5
    -
    340
    269
    8"
    15.00
    16.50
    16.50
    18.0
    33.0
    41.7
    42.7
    542
    430
    10"
    17.50
    18.00
    18.00
    20.0
    39.0
    49.8
    50.8
    816
    620
    12"
    20.50
    19.75
    19.75
    20.0
    44.6
    57.5
    58.6
    1071
    872
    14"
    23.00
    30.00
    30.00
    27.0
    49.7
    63.9
    65.0
    1764
    1323
    16"
    25.50
    33.00
    33.00
    29.0
    55.4
    71.6
    73.3
    2183
    1830
    18"
    28.00
    36.00
    36.00
    33.0
    60.5
    79.5
    80.7
    2866
    2381
    20"
    30.50
    39.00
    39.00
    35.0
    67.3
    87.8
    89.0
    3682
    3109
    22"
    33.00
    43.00
    43.00
    35.0
    73.8
    96.3
    98.5
    4695
    4003
    24"
    36.00
    45.00
    45.00
    43.0
    80.2
    104.4
    106.0
    5644
    4872
    26"
    34.12
    49.00
    49.00
    -
    86.2
    112.7
    114.5
    7089
    6450
    28"
    36.25
    53.00
    53.00
    -
    92.5
    121.0
    122.7
    8370
    6270
    30"
    39.00
    55.00
    55.00
    -
    96.2
    126.4
    128.0
    9702
    8350
    32"
    41.50
    60.00
    60.00
    -
    105.4
    139.0
    140.5
    11045
    9520
    36"
    46.12
    68.00
    68.00
    -
    112.6
    148.9
    150.8
    12375
    10650

    ?

    NOTE : Dimension Of R/J Type Refer To The Special Features.
    *Refer To The Tong Kwang Standard.

    bb1-5.jpg

    Bill of Materials & Parts
    Part No.
    Part Name
    QTY
    ASTM Specifications(Specs.-Grades/Types)
    A216
    A352
    A217
    A351
    WCB
    LCC
    WC6
    WC9
    C5
    CF8
    CF8M
    1-1
    BODY
    1
    A216-WCB
    A352-LCC
    A217-WC6
    A217-WC9
    A217-C5
    A351-CF8 **
    A351-CF8M **
    1-2
    WEDGE
    2"~3"
    1
    13Cr ( 410 )
    304
    /A351-CF8
    316
    /A351-CF8M
    ≧4"
    A216-WCB+410
    A352-LCC+410
    A217-WC6+410
    A217-WC9+410
    A217-C5+410
    1-3
    SEAT RING
    2
    STELLITE HARD FACED
    NOTE 2
    2
    BONNET
    1
    A216-WCB
    A352-LCC
    A217-WC6
    A217-WC9
    A217-C5
    A351-CF8
    A351-CF8M
    4
    GLAND FLANGE
    1
    A216-WCB
    A352-LCC
    A217-WC6
    A217-WC9
    A351-CF8
    6
    HAND WHEEL
    1
    A536
    7
    GASKET
    150#
    1
    NON ASBESTOS SHEET
    PTFE
    300#
    SOFT IRON
    GRAFOIL-316L SHEET
    9
    STEM
    1
    13Cr ( 410 )
    304
    316
    10
    BONNET BUSH
    1
    13Cr ( 410 )
    NOTE ( 2 )
    11
    GLAND
    1
    STAINLESS STEEL
    12
    GLAND
    150#
    A/R
    NON ASBESTOS
    PTFE
    PACKING
    300#
    GRAFOIL
    13
    PACKING RING
    1
    STAINLESS STEEL
    14
    EYE BOLT PIN
    2
    A36
    A276-410
    A276-304
    15
    YOKE SLEEVE
    1
    A439-D2
    16
    YOKE SLEEVE NUT
    1
    A536 / A36
    18
    HAND WHEEL NUT
    1
    A536 / A36
    19
    BONNET BOLT NUT
    A/R
    A194-2H
    A194-7M
    A194-7
    A194-8
    20
    BONNET BOLT
    A/R
    A193-B7
    A320-L7M
    A193-B7 / A193-B16*
    A193-B8
    21
    EYE BOLT NUT
    2
    A194-2H
    A194-7M
    A194-2H
    A194-8
    22
    EYE BOLT
    2
    A307-B
    A320-L7M
    A193-B7
    A193-B8
    NOTE :
    (1)*Used Above 540℃(1000℉) or Requested by Customer (2)**Integral Seat ( Stainless Steel )
    (3)Other Materials Also Available on Requested. (4)Tong Kwang Reserves The Right To Change Designs , Materials Or Specifications Without Notice
     


    頁4 共4頁
    久久精品九九亚洲精品天堂,亚洲国产精品久久久天堂,亚洲中文久久精品无码照片