久久精品九九亚洲精品天堂,亚洲国产精品久久久天堂,亚洲中文久久精品无码照片

  • <pre id="klclk"><label id="klclk"><menu id="klclk"></menu></label></pre><track id="klclk"></track>
  • <td id="klclk"><strike id="klclk"></strike></td>
    東光產品 鑄鋼
    FIG.701B鑄鋼截止閥(對焊型)
    CAST STEEL GLOBE VALVES - CLASS 1500# -【PRESSURE SEAL】
    DESIGN DESCRIPTION:
    Pressure Seal Bonnet / Outside Screw and Yoke Loose & Rotated Plug Disc Rising Stem and Rising Handwheel
     
    STANDARDS:
    Steel Valves,ANSI B16.34,API 600
    Face to Face,End to End,ANSI B16.10
    End Flanges,ANSI B16.5
    Weld Ends,ANSI B16.25
    Pressure Test,ANSI B16.34,API598,MSS-SP-61
    Available with:
    by-pass,Balance,Flanged/Buttwelding Ends Drain,Vacuum,Water Seal,Total Enclosed,(Gear,Motor,Chain,Pneumatic/Hydraulic)Operated
     
     
     
    fa3-1.jpg
     
     
     
    SIZE [inch]2 ~4
     
     
     
    DIMENSIONS IN INCHES:
    UNIT:INCH.

    CLASS 1500
    SIZE
    d
    B
    L
    D1
    H
    H1
    H2
    WT-1bs
    SCH160
    (CLOSE)
    (OPEN)
    B/G
    (APPROX.)
    2"
    1.87
    1.687
    14.50
    12.0
    21.0
    22.0
    -
    89
    21/2"
    2.25
    2.125
    16.50
    12.0
    24.4
    25.8
    -
    130
    3"
    2.75
    2.624
    18.50
    16.0
    26.7
    29.0
    -
    171
    4"
    3.62
    3.438
    21.50
    20.0
    32.1
    34.6
    39.2
    296

     
    fa3-2.jpg
    SIZE [inch]2 ~4
    Bill of Materials & Parts
    Part No.
    Part Name
    QTY
    ASTM Specifications(Specs.-Grades/Types)
    A216
    A352
    A217
    A351
    WCB
    LCC
    WC6
    WC9
    C5
    CF8
    CF8M
    1
    BODY(SEAT)*
    1
    A216-WCB
    A352-LCC
    A217-WC6
    A217-WC9
    A217-C5
    A351-CF8
    A351-CF8M
    2
    BONNET(BUSH)
    1
    @ + HARD FACED 410 or STL#6
    @ or @ + STL#6
    3
    DISC
    1
    13Cr ( 410 ) or 13Cr ( 410 ) + STL#6
    304 or 304 + STL#6
    316 or 316 + STL#6
    @ + HARD FACED 410 or STL#6
    @ or @ + STL#6
    4
    GLAND FLANGE
    1
    A216-WCB
    A351-CF8
    6
    HAND WHEEL
    1
    A536
    7
    GASKET***
    1
    SOFT IRON + SILVER PLT / GRAPHITE
    A182-F304/GRAPHITE
    A182-F316/GRAPHITE
    9
    STEM
    1
    13Cr ( 410 )
    A564-630+Cr PLT
    11
    GLAND
    1
    STAINLESS STEEL
    12
    GLAND PACKING
    A/R
    NON ASBESTOS (GRAPHITE)
    13
    PACKING RING
    1
    STAINLESS STEEL
    14
    EYE BOLT PIN
    2
    A276-410
    15
    YOKE SLEEVE
    1
    A439-D2
    16
    DISC NUT
    1
    A276-410
    A276-304
    A276-316
    17
    POUNDING RECEIVER
    1
    A536
    18
    POUNDING RECEIVER COVER
    1
    A36
    19
    STEM WASHER
    1
    A276-410
    A564-630
    20
    HEX.BOLT
    A/R
    A193-B7
    A320-L7M
    A193-B7/A193-B16**
    A193-B7+Zn PLT
    21
    HAND WHEEL NUT
    1
    A536/A36
    22
    YOKE
    1
    A216-WCB
    23
    BONNET RETAINER COVER
    1
    A216-WCB
    24
    SPACER RING
    1
    A182-F6a
    25
    RETAINER RING
    1
    A182-F6a
    26
    BODY/YOKE CLAMP
    1
    A216-WCB
    28
    WASHER
    1
    A176-430
    29
    YOKE SLEEVE NUT
    1
    A36 / A536
    30
    CLAMP BOLT
    2
    A193-B7
    A320-L7M
    A193-B7
    A193-B7+Zn PLT
    31
    CLAMP BOLT NUT
    4
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    32
    EYE BOLT NUT
    2
    A193-B7
    A320-L7M
    A193-B7
    A193-B7+Zn PLT
    33

    HEX.NUT

    1
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    34
    NIPPLE
    1
    CARBON STEEL
    35

    TORQUE KEY

    1

    13Cr(410)/A564-630

    36

    TORQUE KEY SCREW

    1

    A276-410

    37
    TRUST BALL BEARING
    1
    A295
    NOTE: *(1)Integral Seat (Stellite Hard Faced) (2)Other Materials Also Available on Requested.
    **(3)Used Above 540℃(1000℉) or Requested by Customer (4)Tong Kwang Reserves The Right To Change Designs, Materials Or Specifications Without Notice
    ***(5)Graphite Gasket be Used When Standardized by Tong Kwang Or Requested by Customer (6)STL#6=Stellite (AWS A5.13 ER CoCr-A)
    (7)Mat'l of Hard Faced to be Choose or Requested by Customer @ (8)Equal Body Mat'l Class (Cast or Forged)


    DESIGN DESCRIPTION:
    Pressure Seal Bonnet / Outside Screw and Yoke Loose & Rotated Plug Disc Rising Stem and Rising Handwheel
     
    STANDARDS:
    Steel Valves,ANSI B16.34,API 600
    Face to Face,End to End,ANSI B16.10
    End Flanges,ANSI B16.5
    Weld Ends,ANSI B16.25
    Pressure Test,ANSI B16.34,API598,MSS-SP-61
    Available with:
    by-pass,Balance,Flanged/Buttwelding Ends Drain,Vacuum,Water Seal,Total Enclosed,(Gear,Motor,Chain,Pneumatic/Hydraulic)Operated

    fa3-3.jpg

    SIZE [inch]5 ~12
     
    DIMENSIONS IN INCHES:
    UNIT:INCH.

    CLASS 1500
    SIZE
    d
    B
    L
    D1
    H
    H1
    H2
    WT-1bs
    SCH160
    (CLOSE)
    (OPEN)
    B/G
    (APPROX.)
    5"
    4.37
    4.313
    26.50
    22.0
    40.5
    43.8
    48.4
    390
    6"
    5.37
    5.187
    27.75
    26.0
    42.2
    45.1
    49.7
    700
    8"
    7.00
    6.813
    32.75
    26.0
    49.2
    52.5
    57.1
    1161
    10"
    8.75
    8.500
    39.00
    30.0
    55.8
    59.6
    64.2
    1736
    12"
    10.37
    10.126
    44.50
    30.0
    63.5
    67.8
    72.4
    2604

     
    fa3-4.jpg

    SIZE [inch]5 ~12
    Bill of Materials & Parts
    Part No.
    Part Name
    QTY
    ASTM Specifications(Specs.-Grades/Types)
    A216
    A352
    A217
    A351
    WCB
    LCC
    WC6
    WC9
    C5
    CF8
    CF8M
    1
    BODY(SEAT)*
    1
    A216-WCB
    A352-LCC
    A217-WC6
    A217-WC9
    A217-C5
    A351-CF8
    A351-CF8M
    2
    BONNET (BUSH)
    1
    @ + HARD FACED 410 or STL#6
    @ or @ + STL#6
    3
    DISC
    1
    13Cr ( 410 ) or 13Cr ( 410 ) + STL#6
    304 or 304 + STL#6
    316 or 316 + STL#6
    @ + HARD FACED 410 or STL#6
    @ or @ + STL#6
    4
    GLAND FLANGE
    1
    A216-WCB
    A351-CF8
    6
    HAND WHEEL
    1
    A536
    7
    GASKET***
    1
    SOFT IRON + SILVER PLT / GRAPHITE
    A182-F304 / GRAPHITE
    A182-F316/GRAPHITE
    9
    STEM
    1
    13 Cr (410)

    A564-630+CrPLT

    11
    GLAND
    1
    STAINLESS STEEL
    12
    GLAND PACKING
    A/R
    NON ASBESTOS ( GRAPHITE )
    13
    PACKING RING
    1
    STAINLESS STEEL
    15
    YOKE SLEEVE
    1
    A439-D2
    16
    DISC NUT
    1
    A276-410
    A276-304
    A276-316
    19
    STEM WASHER
    1
    A276-410
    A276-304
    A276-316
    20
    HEX.BOLT
    A/R
    A193-B7
    A320-L7M
    A193-B7 / A193-B16**
    A193-B7+Zn PLT
    21
    HAND WHEEL NUT
    1
    A536
    22
    YOKE
    1
    A216-WCB
    23
    BONNET RETAINER COVER
    1
    A216-WCB / A36
    24
    SPACER RING
    1
    A182-F6a
    25
    RETAINER RING
    1
    A182-F6a
    26
    BODY/YOKE CLAMP
    1
    A216-WCB
    28
    WASHER
    1
    A176-430
    29
    YOKE SLEEVE NUT
    1
    A36-A536
    30
    CLAMP BOLT
    2
    A193-B7
    A320-L7M
    A193-B7
    A193-B7+Zn PLT
    31
    CLAMP BOLT NUT
    4
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    32
    EYE BOLT
    2
    A193-B7
    A320-L7M
    A193-B7
    A193-B7+Zn PLT
    33
    HEX.NUT
    2
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    34
    NIPPLE
    1
    CARBON STEEL
    35
    TORQUE KEY
    1
    13Cr (410) / A564-630
    36
    TORQUE KEY SCREW
    1
    A276-410
    37
    TRUST BALL BEARING
    1
    A295
    39
    HEX.BOLT
    A/R
    A 325
    40
    SPRING WASHER
    A/R
    A510-1060
    41
    BEVEL GEAR BRACKETS
    A/R
    A536/A216-WCB
    42
    POUNDING RECEIVER
    1
    A536
    43
    BEVEL GEAR
    1
    A536
    44
    HEX SOCKET HEAD CAP SCREWS
    A/R
    A193-B7
    46
    HEX.BOLT
    A/R
    A193-B7
    NOTE: *(1)Integral Seat (Stellite Hard Faced) (2)Other Materials Also Available on Requested.
    **(3)Used Above 540℃(1000℉) or Requested by Customer (4)Tong Kwang Reserves The Right To Change Designs, Materials Or Specifications Without Notice
    ***(5)Graphite Gasket be Used When Standardized by Tong Kwang Or Requested by Customer (6)STL#6=Stellite (AWS A5.13 ER CoCr-A)
    (7)Mat'l of Hard Faced to be Choose or Requested by Customer @ (8)Equal Body Mat'l Class (Cast or Forged)
     
    FIG.762B鑄鋼閘閥(對焊型)
    CAST STEEL GATE VALVES- CLASS 2500# -【PRESSURE SEAL】
    DESIGN DESCRIPTION:
    Pressure Seal Bonnet / Outside Screw and Yoke Flexible Wedge,Rising Stem and Non-Rising Handwheel
    STANDARDS:
    Steel Gate Valves,API 600
    Steel Valves,ANSI B16.34
    Face to Face,End to End,ANSI B16.10
    Weld Ends,ANSI B16.25
    Pressure Test,ANSI B16.34,API598,MSS-SP-61
    Available with:
    by-pass,Balance,Flanged/Buttwelding Ends Drain,Vacuum,Water Seal,Total Enclosed,(Gear,Motor,Chain,Pneumatic/Hydraulic)Operated
    fa2-1.jpg
    SIZE [inch]2 ~6
    DIMENSIONS IN INCHES:
    UNIT:INCH.

    CLASS 2500
    SIZE
    d
    B
    L
    D1
    H
    H1
    H2
    WT-1bs
    SCH XXS
    (CLOSE)
    (OPEN)
    B/G
    (APPROX.)
    2"
    1.50
    1.503
    11.00
    12.00
    18.3
    20.5
    -
    250
    21/2"
    1.87
    1.771
    13.00
    14.50
    22.1
    24.9
    -
    320
    3"
    2.25
    2.300
    14.50
    20.00
    26.7
    29.5
    34.1
    590
    4"
    2.87
    3.152
    18.00
    24.00
    27.4
    30.9
    35.5
    1310
    6"
    4.37
    4.897
    21.00
    30.00
    38.1
    43.3
    46.9
    1890

    fa2-2.jpg
    SIZE [inch]2 ~6
    Bill of Materials & Parts
    Part No.
    Part Name
    QTY
    ASTM Specifications(Specs.-Grades/Types)
    A216
    A352
    A217
    A351
    WCB
    LCC
    WC6
    WC9
    C5
    CF8
    CF8M
    1-1
    BODY
    1
    A216-WCB
    A352-LCC
    A217-WC6
    A217-WC9
    A217-C5
    A351-CF8+STL#6*
    A351-CF8M+STL#6*
    1-2
    WEDGE
    1
    13Cr ( 410 ) or 13Cr ( 410 ) + STL#6
    304 or 304+STL#6
    316 or 316+STL#6
    @ + HARD FACED 410 or STL#6
    @ or @ + STL#6
    1-3
    SEAT RING
    2
    STELLITE HARD FACED
    2
    BONNET (BUSH)
    1
    @ + HARD FACED 410 or STL#6
    @ or @ + STL#6
    4
    GLAND FLANGE
    1
    A216-WCB
    A351-CF8
    6
    HAND WHEEL
    1
    A536
    7
    GASKET***
    1
    SOFT IRON + SILVER PLT / GRAPHITE
    A182-F304 / GRAPHITE
    A182-F316/GRAPHITE
    9
    STEM
    1
    13 Cr (410)
    304/A564-630+Cr PLT
    316/A564-630+Cr PLT
    11
    GLAND
    1
    STAINLESS STEEL
    12
    GLAND PACKING
    A/R
    NON ASBESTOS ( GRAPHITE )
    13
    PACKING RING
    1
    STAINLESS STEEL
    14
    EYE BOLT PIN
    2
    A276-410
    15
    YOKE SLEEVE
    1
    A439-D2
    16
    YOKE SLEEVE COVER
    1
    A36
    18
    HAND WHEEL NUT
    1
    A536 / A181
    19
    YOKE
    1
    A216-WCB
    20
    BONNET RETAINER COVER
    1
    A216-WCB / A105
    21
    EYE BOLT CLAMP
    1
    A216-WCB
    22
    SPACE RING
    1
    A182-F6a
    23
    RETAINER RING
    1
    A182-F6a
    24
    YOKE CLAMP
    1
    A216-WCB
    25
    RETAINER BOLT
    A/R
    A193-B7
    A320-L7M
    A193-B7/A193-B16*
    A193-B7+Zn PLT
    26
    SPRING WSHER
    A/R
    A 510-1060
    27
    RETAINER BOLT NUT
    A/R
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    28
    STUD BOLT
    A/R
    A193-B7
    A320-L7M
    A193-B7
    A193-B7+Zn PLT
    29
    HEX.NUT
    A/R
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    30
    EYE BOLT
    A/R
    A193-B7
    A320-L7M
    A193-B7
    A193-B7+Zn PLT
    31
    EYE BOLT NUT
    A/R
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    32
    NIPPLE
    1
    CARBON STEEL
    33
    THRUST BALL BEARING
    2
    A 295
    NOTE: *(1)Integral Seat (Stellite Hard Faced) (2)Other Materials Also Available on Requested.
    **(3)Used Above 540℃(1000℉) or Requested by Customer (4)Tong Kwang Reserves The Right To Change Designs, Materials Or Specifications Without Notice
    ***(5)Graphite Gasket be Used When Standardized by Tong Kwang Or Requested by Customer (6)STL#6=Stellite (AWS A5.13 ER CoCr-A)
    (7)Mat'l of Hard Faced to be Choose or Requested by Customer @ (8)Equal Body Mat'l Class (Cast or Forged)


    DESIGN DESCRIPTION:
    Pressure Seal Bonnet / Outside Screw and Yoke Flexible Wedge,Rising Stem and Non-Rising Handwheel
    STANDARDS:
    Steel Gate Valves,API 600
    Steel Valves,ANSI B16.34
    Face to Face,End to End,ANSI B16.10
    Weld Ends,ANSI B16.25
    Pressure Test,ANSI B16.34,API598,MSS-SP-61
    Available with:
    by-pass,Balance,Flanged/Buttwelding Ends Drain,Vacuum,Water Seal,Total Enclosed,(Gear,Motor,Chain,Pneumatic/Hydraulic)Operated

    fa2-3.jpg

    SIZE [inch]8 ~16
    DIMENSIONS IN INCHES:
    UNIT:INCH.

    CLASS 2500
    SIZE
    d
    B
    L
    D1
    H
    H1
    H2
    WT-1bs
    SCH160
    (CLOSE)
    (OPEN)
    B/G
    (APPROX.)
    8"
    5.75
    6.813
    30.00
    30.00
    49.3
    56.0
    61.6
    2530
    10"
    7.25
    8.500
    36.00
    24.00
    55.9
    64.2
    68.8
    3420
    12"
    8.62
    10.126
    41.00
    24.00
    64.3
    72.4
    82.3
    4012
    14"
    9.50
    11.188
    44.00
    30.00
    80.1
    89.5
    101.2
    4980
    16"
    10.87
    12.812
    49.00
    30.00
    92.5
    101.5
    112.3
    5320

    fa2-4.jpg

    SIZE [inch]8 ~16
    Bill of Materials & Parts
    Part No.
    Part Name
    QTY
    ASTM Specifications(Specs.-Grades/Types)
    A216
    A352
    A217
    A351
    WCB
    LCC
    WC6
    WC9
    C5
    CF8
    CF8M
    1-1
    BODY
    1
    A216-WCB
    A352-LCC
    A217-WC6
    A217-WC9
    A217-C5
    A351-CF8+STL**
    A351-CF8M+STL**
    1-2
    WEDGE
    @ + HARD FACED 410 or STL#6
    @ or @ + STL#6
    1-3
    SEAT RING
    2
    STELLITE HARD FACED
    2
    BONNET (BUSH)
    1
    @ + HARD FACED 410 or STL#6
    @ or @ + STL#6
    4
    GLAND FLANGE
    1
    A216-WCB
    A351-CF8
    6
    HAND WHEEL
    1
    A536
    7
    GASKET***
    1
    SOFT IRON + SILVER PLT / GRAPHITE
    A182-F304 / GRAPHITE
    A182-F316/GRAPHITE
    9
    STEM
    1
    13 Cr (410)
    304/A564-630+Cr PLT
    316/A564-630+Cr PLT
    11
    GLAND
    1
    STAINLESS STEEL
    12
    GLAND PACKING
    A/R
    NON ASBESTOS ( GRAPHITE )
    13
    PACKING RING
    1
    STAINLESS STEEL
    15
    YOKE SLEEVE
    1
    A439-D2
    16
    YOKE SLEEVE COVER
    1
    A36
    19
    YOKE
    1
    A216-WCB
    20
    BONNET RETAINER COVER
    1
    A216-WCB / A105
    21
    EYE BOLT CLAMP
    1
    A216-WCB
    22
    SPACE RING
    1
    A182-F6a
    23
    RETAINER RING
    1
    A182-F6a
    24
    BODY/YOKE CLAMP
    1
    A216-WCB
    25
    RETAINER BOLT
    A/R
    A193-B7
    A320-L7M
    A193-B7 / A193-B16**
    A193-B7+Zn PLT
    26
    SPRING WASHER
    A/R
    A510-1060
    27
    HEX.NUT
    A/R
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    28
    STUD BOLT
    A/R
    A193-B7
    A320-L7M
    A193-B7
    A193-B7+Zn PLT
    29
    HEX.NUT
    A/R
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    30
    EYE BOLT
    A/R
    A193-B7
    A320-L7M
    A193-B7
    A193-B7+Zn PLT
    31
    EYE BOLT NUT
    A/R
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    36
    THRUST BALL BEARING
    2
    A295
    37
    BEVEL GEAR
    1
    A536
    38
    HEX.BOLT
    A/R
    A 325
    39
    SPRING WASHER
    A/R
    A510-1060
    41
    BEVEL GEAR BRACKETS
    A/R
    A536 / A216-WCB
    42
    POUNDING RECEIVER
    1
    A536
    43
    HEX.SOCKET HEAD CAP SCREWS
    A/R
    A193-B7
    44
    SPRING WASHER
    A/R
    A510-1060
    NOTE: *(1)Integral Seat (Stellite Hard Faced) (2)Other Materials Also Available on Requested.
    **(3)Used Above 540℃(1000℉) or Requested by Customer (4)Tong Kwang Reserves The Right To Change Designs, Materials Or Specifications Without Notice
    ***(5)Graphite Gasket be Used When Standardized by Tong Kwang Or Requested by Customer (6)STL#6=Stellite (AWS A5.13 ER CoCr-A)
    (7)Mat'l of Hard Faced to be Choose or Requested by Customer @ (8)Equal Body Mat'l Class (Cast or Forged)
     
    Welcome to TONG KWANG VALVE
    FIG.761B鑄鋼閘閥(對焊型)
    CAST STEEL GATE VALVES- CLASS 1500# -【PRESSURE SEAL】
    DESIGN DESCRIPTION:
    Pressure Seal Bonnet / Outside Screw and Yoke Flexible Wedge,Rising Stem and Non-Rising Handwheel
    STANDARDS:
    Steel Gate Valves,API 600
    Steel Valves,ANSI B16.34
    Face to Face,End to End,ANSI B16.10
    Weld Ends,ANSI B16.25
    Pressure Test,ANSI B16.34,API598,MSS-SP-61
    Available with:
    by-pass,Balance,Flanged/Buttwelding Ends Drain,Vacuum,Water Seal,Total Enclosed,(Gear,Motor,Chain,Pneumatic/Hydraulic)Operated
    fa1-1.jpg
    SIZE [inch]2 ~6
    DIMENSIONS IN INCHES:
    UNIT:INCH.

    CLASS 1500
    SIZE
    d
    B
    L
    D1
    H
    H1
    H2
    WT-1bs
    SCH160
    (CLOSE)
    (OPEN)
    B/G
    (APPROX.)
    2"
    1.87
    1.687
    8.50
    12.00
    18.8
    21.1
    -
    160
    21/2"
    2.25
    2.125
    10.00
    15.00
    22.7
    25.4
    -
    210
    3"
    2.75
    2.624
    12.00
    20.00
    26.7
    29.5
    -
    280
    4"
    3.62
    3.438
    16.00
    22.00
    31.5
    34.5
    39.1
    480
    6"
    5.37
    5.187
    22.00
    24.00
    41.5
    45.3
    49.9
    890

    fa1-2.jpg
    SIZE [inch]2 ~6
    Bill of Materials & Parts
    Part No.
    Part Name
    QTY
    ASTM Specifications(Specs.-Grades/Types)
    A216
    A352
    A217
    A351
    WCB
    LCC
    WC6
    WC9
    C5
    CF8
    CF8M
    1-1
    BODY
    1
    A216-WCB
    A352-LCC
    A217-WC6
    A217-WC9
    A217-C5
    A351-CF8+STL#6*
    A351-CF8M+STL#6*
    1-2
    WEDGE
    1
    13Cr ( 410 ) or 13Cr ( 410 ) + STL#6
    304 or 304+STL#6
    316 or 316+STL#6
    @ + HARD FACED 410 or STL#6
    @ or @ + STL#6
    1-3
    SEAT RING
    2
    STELLITE HARD FACED
    2
    BONNET (BUSH)
    1
    @ + HARD FACED 410 or STL#6
    @ or @ + STL#6
    4
    GLAND FLANGE
    1
    A216-WCB
    A351-CF8
    6
    HAND WHEEL
    1
    A536
    7
    GASKET***
    1
    SOFT IRON + SILVER PLT / GRAPHITE
    A182-F304 / GRAPHITE
    A182-F316/GRAPHITE
    9
    STEM
    1
    13 Cr (410)
    304/A564-630+Cr PLT
    316/A564-630+Cr PLT
    11
    GLAND
    1
    STAINLESS STEEL
    12
    GLAND PACKING
    A/R
    NON ASBESTOS ( GRAPHITE )
    13
    PACKING RING
    1
    STAINLESS STEEL
    14
    EYE BOLT PIN
    2
    A276-410
    15
    YOKE SLEEVE
    1
    A439-D2
    16
    YOKE SLEEVE COVER
    1
    A36
    18
    HAND WHEEL NUT
    1
    A36
    19
    YOKE
    1
    A216-WCB
    20
    BONNET RETAINER COVER
    1
    A216-WCB / A105
    21
    EYE BOLT CLAMP
    1
    A216-WCB
    22
    SPACE RING
    1
    A182-F6a
    23
    RETAINER RING
    1
    A182-F6a
    24
    RETAINER BOLT
    A/R
    A193-B7
    A320-L7M
    A193-B7 / A193-B16**
    A193-B7+Zn PLT
    25
    RETAINER BOLT NUT
    A/R
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    29
    EYE BOLT
    A/R
    A193-B7
    A320-L7M
    A193-B7
    A193-B7+Zn PLT
    30
    EYE BOLT NUT
    A/R
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    32
    NIPPLE
    1
    CARBON STEEL
    33
    THRUST BALL BEARING
    2
    A 295
    NOTE: *(1)Integral Seat (Stellite Hard Faced) (2)Other Materials Also Available on Requested.
    **(3)Used Above 540℃(1000℉) or Requested by Customer (4)Tong Kwang Reserves The Right To Change Designs, Materials Or Specifications Without Notice
    ***(5)Graphite Gasket be Used When Standardized by Tong Kwang Or Requested by Customer (6)STL#6=Stellite (AWS A5.13 ER CoCr-A)
    (7)Mat'l of Hard Faced to be Choose or Requested by Customer @ (8)Equal Body Mat'l Class (Cast or Forged)


    DESIGN DESCRIPTION:
    Pressure Seal Bonnet / Outside Screw and Yoke Flexible Wedge,Rising Stem and Non-Rising Handwheel
    STANDARDS:
    Steel Gate Valves,API 600
    Steel Valves,ANSI B16.34
    Face to Face,End to End,ANSI B16.10
    Weld Ends,ANSI B16.25
    Pressure Test,ANSI B16.34,API598,MSS-SP-61
    Available with:
    by-pass,Balance,Flanged/Buttwelding Ends Drain,Vacuum,Water Seal,Total Enclosed,(Gear,Motor,Chain,Pneumatic/Hydraulic)Operated

    fa1-3.jpg

    SIZE [inch]8 ~16
    DIMENSIONS IN INCHES:
    UNIT:INCH.

    CLASS 1500
    SIZE
    d
    B
    L
    D1
    H
    H1
    H2
    WT-1bs
    SCH160
    (CLOSE)
    (OPEN)
    B/G
    (APPROX.)
    8"
    7.00
    6.813
    28.00
    24.00
    45.0
    52.8
    55.0
    1459
    10"
    8.75
    8.500
    34.00
    30.00
    53.6
    63.2
    66.9
    2928
    12"
    10.37
    10.126
    39.00
    24.00
    64.3
    72.4
    82.3
    3250
    14"
    11.37
    11.188
    42.00
    24.00
    80.1
    89.5
    101.2
    4100
    16"
    13.00
    12.812
    47.00
    30.00
    92.5
    101.5
    112.3
    5050

    fa1-4.jpg

    SIZE [inch]8 ~16
    Bill of Materials & Parts
    Part No.
    Part Name
    QTY
    ASTM Specifications(Specs.-Grades/Types)
    A216
    A352
    A217
    A351
    WCB
    LCC
    WC6
    WC9
    C5
    CF8
    CF8M
    '1-1
    BODY
    1
    A216-WCB
    A352-LCC
    A217-WC6
    A217-WC9
    A217-C5
    A351-CF8+STL#6*
    A351-CF8M+STL#6*
    '1-2
    WEDGE
    @ + HARD FACED 410 or STL#6
    @ or @ + STL#6
    '1-3
    SEAT RING
    2
    STELLITE HARD FACED
    2
    BONNET (BUSH)
    1
    @ + HARD FACED 410 or STL#6
    @ or @ + STL#6
    4
    GLAND FLANGE
    1
    A216-WCB
    A351-CF8
    6
    HAND WHEEL
    1
    A536
    7
    GASKET***
    1
    SOFT IRON + SILVER PLT / GRAPHITE
    A182-F304 / GRAPHITE
    A182-F316/GRAPHITE
    9
    STEM
    1
    13 Cr (410)
    304/A564-630+Cr PLT
    316/A564-630+Cr PLT
    11
    GLAND
    1
    STAINLESS STEEL
    12
    GLAND PACKING
    A/R
    NON ASBESTOS ( GRAPHITE )
    13
    PACKING RING
    1
    STAINLESS STEEL
    15
    YOKE SLEEVE
    1
    A439-D2
    16
    YOKE SLEEVE COVER
    1
    A36
    19
    YOKE
    1
    A216-WCB
    20
    BONNET RETAINER COVER
    1
    A216-WCB / A105
    21
    EYE BOLT CLAMP
    1
    A216-WCB
    22
    SPACE RING
    1
    A182-F6a
    23
    RETAINER RING
    1
    A182-F6a
    24
    BODY/YOKE CLAMP
    1
    A216-WCB
    25
    RETAINER BOLT
    A/R
    A193-B7
    A320-L7M
    A193-B7 / A193-B16**
    A193-B7+Zn PLT
    26
    SPRING WASHER
    A/R
    A510-1060
    27
    HEX.NUT
    A/R
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    28
    STUD BOLT
    A/R
    A193-B7
    A320-L7M
    A193-B7
    A193-B7+Zn PLT
    29
    HEX.NUT
    A/R
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    30
    EYE BOLT
    A/R
    A193-B7
    A320-L7M
    A193-B7
    A193-B7+Zn PLT
    31
    EYE BOLT NUT
    A/R
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    34
    CLAMP BOLT
    A/R
    A193-B7
    A320-L7M
    A193-B7
    A193-B7+Zn PLT
    35
    HEX.NUT
    A/R
    A194-2H
    A194-7M
    A194-7
    A194-2H+Zn PLT
    36
    THRUST BALL BEARING
    2
    A295
    37
    BEVEL GEAR
    1
    A536
    38
    HEX.BOLT
    A/R
    A 325
    39
    SPRING WASHER
    A/R
    A510-1060
    41
    BEVEL GEAR BRACKETS
    A/R
    A536
    42
    POUNDING RECEIVER
    1
    A536
    43
    HEX.SOCKET HEAD CAP SCREWS
    A/R
    A193-B7
    44
    SPRING WASHER
    A/R
    A510-1060
    NOTE: *(1)Integral Seat (Stellite Hard Faced) (2)Other Materials Also Available on Requested.
    **(3)Used Above 540℃(1000℉) or Requested by Customer (4)Tong Kwang Reserves The Right To Change Designs, Materials Or Specifications Without Notice
    ***(5)Graphite Gasket be Used When Standardized by Tong Kwang Or Requested by Customer (6)STL#6=Stellite (AWS A5.13 ER CoCr-A)
    (7)Mat'l of Hard Faced to be Choose or Requested by Customer @ (8)Equal Body Mat'l Class (Cast or Forged)
     
    FIG.767F鑄鋼直通式閘閥(法蘭型)
    CAST STEEL THROUGH CONDUIT GATE VALVES-CLASS 150#
    SIZE [inch]:2 ~30

    PARTS AND MATERIAL LIST
    Part No.
    Part Name
    QTY
    MATERIALS
    1
    BODY
    1
    A216-WCB
    2
    BONNET
    1
    A216-WCB
    3
    DISC PLATE
    1
    A36+MOS2 COATING
    4
    GLAND FLANGE
    1
    A216-WCB+A53
    5-1
    SEAT RING
    2
    A182-F6a
    5-2
    SEAT INSERT
    2
    PTFE
    6
    HAND WHEEL
    1
    A536
    7
    GASKET
    1
    PTFE+304 SPIRAL WOUND
    9
    STEM
    1
    A182-F6a CL-2
    10
    BONNET BUSH
    1
    A276-410
    11
    GLAND
    1
    A276-410
    13
    PACKING RING
    1
    A276-410
    14
    EYE BOLT PIN
    2
    A36
    15
    YOKE SLEEVE
    1
    A439-D2
    16
    YOKE SLEEVE NUT
    1
    A36
    18
    HAND WHEEL NUT
    1
    A36
    19
    PACKING
    1
    PTFE OR V# 7233
    21
    ENCLOSURE TUBE
    1
    CARBON STEEL
    23
    PLUG
    1
    A276-410
    24
    BONNET BOLT NUT
    A/R
    A194-2H
    25
    BONNET BOLT
    A/R
    A193-B7
    27
    STOPPER
    1
    A36
    28
    EYE BOLT NUT
    2
    A194-2H
    29
    EYE BOLT
    2
    A307-B
    32
    INDICATOR
    1
    A276-304
    33
    DISC GUIDE
    1
    A240-304
    35
    O RING
    4
    VITON
    36
    ENCLOSURE
    1
    A36+A53
    37
    GREASE INJECTOR
    3
    A108-1025
    38
    RELIEF VALVE
    1
    A276-410
    Design & Test STD. : API 6D

    bb9-1.jpg

    DIMENSIONS IN INCHES:
    UNIT:INCH.

    CLASS 150
    SIZE
    2
    2 1/2
    3
    4
    6
    8
    10
    12
    14
    16
    18
    20
    24
    26
    28
    30
    D
    6.00
    7.00
    7.50
    9.00
    11.00
    13.50
    16.00
    19.00
    21.00
    23.50
    25.00
    27.50
    32.00
    30.94
    32.94
    34.94
    L
    7.00
    7.50
    8.00
    9.00
    10.50
    11.50
    13.00
    14.00
    15.00
    16.00
    17.00
    18.00
    20.00
    22.00
    24.00
    26.00
    L1
    8.50
    9.50
    11.12
    12.00
    15.88
    16.50
    18.00
    19.75
    22.50
    24.00
    26.00
    28.00
    32.00
    34.00
    36.00
    36.00
    H (OPEN)
    21.50
    23.50
    28.00
    35.50
    47.00
    57.50
    68.92
    78.00
    87.00
    95.00
    110.00
    120.50
    142.00
    152.00
    161.50
    171.00
    H1(CLOSE)
    18.50
    21.00
    24.00
    30.50
    40.00
    48.50
    57.76
    64.50
    71.50
    78.50
    90.50
    99.50
    117.50
    125.00
    132.50
    140.00
    F
    5.00
    6.00
    7.50
    8.00
    12.00
    15.00
    19.29
    22.00
    24.50
    28.00
    32.50
    35.50
    42.00
    44.50
    47.50
    50.50
    D1
    8
    8
    10
    10
    12
    16
    18
    20
    18
    18
    18
    24
    24
    30
    30
    30
    NOTE : (1)Other Materials Also Available on Requested.
    (2)Tong Kwang Reserves The Right To Change Designs , Materials or Specifications Without Notice.
     
    FIG.757F / 758F鑄鋼樞軸式球閥(法蘭型)
    CAST STEEL BALL VALVES (TRUNNION)CLASS 150# / 300#
    DESIGN DESCRIPTION:
    Split Body , Full Port , Fire Safe Design Anti-Static Device , Cavity Relieving Seats Lever / Worm Gear Operator , Locking Device Flanged Ends
     
    STANDARDS:
    Steel Valves : ANSI B16.34 Design : API 6D
    Face to Face : API 6D ( Same as ANSI B16.10 )
    End Flanges : ANSI B16.5
    Pressure Test : API 6D
     
     
     
    bb8-1.jpg
     
     
     
    SIZE [inch]2 ~24

    DIMENSIONS IN INCHES:
    UNIT:INCH
    CLASS 150
    SIZE
    D
    L
    H
    I
    A
    W
    B
    E
    WT(APPROX.)
    lbs
    2"
    6.00
    7.00
    9.6
    7.8
    ----
    ----
    ----
    ----
     
    21/2"
    7.00
    7.50
    10.9
    13.1
    ----
    ----
    ----
    ----
     
    3"
    7.50
    8.00
    11.4
    13.1
    ----
    ----
    ----
    ----
     
    4"
    9.00
    9.00
    12.3
    15.5
    ----
    ----
    ----
    ----
     
    6"
    11.00
    15.50
    16.8
    31.5
    ----
    ----
    ----
    ----
     
    8"
    13.50
    18.00
    ----
    ----
    15.6
    18.0
    13.4
    3.2
     
    10"
    16.00
    21.00
    ----
    ----
    17.1
    18.0
    13.4
    3.2
     
    12"
    19.00
    24.00
    ----
    ----
    23.0
    24.0
    15.9
    3.7
     
    14"
    21.00
    27.00
    ----
    ----
    24.3
    24.0
    15.9
    3.7
     
    16"
    23.5
    30.00
    ----
    ----
    26.7
    24.0
    15.9
    3.7
     
    18"
    25.00
    34.00
    ----
    ----
    29.4
    30.0
    17.3
    4.5
     
    20"
    27.50
    36.00
    ----
    ----
    31.8
    30.0
    17.3
    4.5
     
    24"
    32.00
    42.00
    ----
    ----
    39.3
    30.0
    21.1
    4.5
     
    CLASS 300
    SIZE
    D
    L
    H
    I
    A
    W
    B
    E
    WT(APPROX.)
    lbs
    2"
    6.50
    8.50
    9.6
    7.8
    ----
    ----
    ----
    ----
     
    21/2"
    7.50
    9.50
    10.9
    13.1
    ----
    ----
    ----
    ----
     
    3"
    8.25
    11.12
    11.4
    13.1
    ----
    ----
    ----
    ----
     
    4"
    10.00
    12.00
    12.3
    15.5
    ----
    ----
    ----
    ----
     
    6"
    12.50
    15.88
    16.8
    31.5
    ----
    ----
    ----
    ----
     
    8"
    15.00
    19.75
    ----
    ----
    15.6
    18.0
    13.4
    3.2
     
    10"
    17.50
    22.38
    ----
    ----
    17.1
    18.0
    13.4
    3.2
     
    12"
    20.50
    25.50
    ----
    ----
    23.0
    24.0
    15.9
    3.7
     
    14"
    23.00
    30.00
    ----
    ----
    24.3
    24.0
    15.9
    3.7
     
    16"
    25.50
    33.00
    ----
    ----
    26.7
    24.0
    15.9
    3.7
     
    18"
    28.00
    36.00
    ----
    ----
    29.4
    30.0
    17.3
    4.5
     
    20"
    30.50
    39.00
    ----
    ----
    31.8
    30.0
    17.3
    4.5
     
    24"
    36.00
    45.00
    ----
    ----
    39.3
    30.0
    21.1
    4.5
     

     


     
    Bill of Materials & Parts
    Part No.
    Part Name
    QTY
    ASTM Specifications(Specs.-Grades/Types)
    A216-WCB / WCC
    A352-LCC / LCB
    A351-CF8
    A351-CF3
    A351-CF8M
    A351-CF3M
     
    A351-CF8C
    Trim 304
    Trim 304
    Trim 304
    Trim 304L
    Trim 316
    Trim 316L
    Trim 347
    1
    BODY
    1
    A216-WCB / WCC
    A352-LCC / LCB
    A351-CF8
    A351-CF3
    A351-CF8M
    A351-CF3M
    A351-CF8C
    2
    CAP
    1/2
    A216-WCB / WCC
    A352-LCC / LCB
    A351-CF8
    A351-CF3
    A351-CF8M
    A351-CF3M
    A351-CF8C
    3
    BALL
    1
    A351-CF8
    A351-CF3
    A351-CF8M
    A351-CF3M
    A351-CF8C
    4
    GLAND FLANGE
    1
    A36
    A276-304
    5-1
    SEAT RETAINER
    2
    A276-304
    A276-304L
    A276-316
    A276-316L
    A276-347
    5-2
    SEAT
    2
    REINFORCED TEFLON
    7
    GASKET
    1/2
    GRAFOIL
    9
    STEM
    1
    A276-304
    A276-304L
    A276-316
    A276-316L
    A276-347
    12
    GLAND PACKING
    1
    GRAFOIL
    13
    PACKING RING
    1
    A276-304
    A276-304L
    A276-316
    A276-316L
    A276-347
    15
    O-Ring
    4
    NBR
    16
    WASHER
    1
    A276-304
    A276-304L
    A276-316
    A276-316L
    A276-347
    17
    RETAINING RING
    1
    A276-304
    A276-304L
    A276-316
    A276-316L
    A276-347
    18
    PIVOT
    1
    A276-304
    A276-304L
    A276-316
    A276-316L
    A276-347
    19
    WASHER
    1
    A276-304
    A276-304L
    A276-316
    A276-316L
    A276-347
    20
    THRUST BEARING
    1
    REINFORCED TEFLON
    21
    THRUST WASHER
    1
    REINFORCED TEFLON
    22
    STUD BOLT
    A/R
    A193-B7
    A320-L7M
    A193-B8
    23
    NUT
    A/R
    A194-2H
    A194-7M
    A193-8
    24
    CAP SCREW
    A/R
    A193-B7
    A320-L7M
    A193-B8
    26
    CAP SCREW
    A/R
    A193-B7
    A320-L7M
    A193-B8
    27
    SPRING WASHER
    A/R
    A193-B7
    A320-L7M
    A193-B8
    32
    LOWER STEM
    1
    A276-304
    A276-304L
    A276-316
    A276-316L
    A276-347
    35
    BOTTOM COVER
    1
    A105
    A350-LF2
    A182-F304
    A182-F304L
    A182-316
    A182-316L
    A182-347
    37
    SEAT RETAINER SPRING
    2
    A705-630
    38
    STEM BEARING
    2
    REINFORCED TEFLON
    39
    KEY
    3
    A576-1045
    A276-F304
    A276-F304L
    A276-316
    A276-316L
    A182-347
    41
    ADAPTER FLANGE
    1
    A36
    42
    O-Ring
    4
    NBR
    44
    GASKET
    1
    GRAFOIL
    46
    DRAIN PLUG
    1
    A276-410
    A276-F304
    A276-F304L
    A276-316
    A276-316L
    A182-347
    52
    WORM GEAR UNIT
    1
    A536
    NOTE :
    (1)Other Materials Also Available on Requested. (2)The Metal Can be a Requested Produce To Conform To Standard On "NACE".
    (3)Tong Kwang Reserves The Right To Change Designs , Materials or Specifications Without Notice.
     


    頁2 共4頁
    久久精品九九亚洲精品天堂,亚洲国产精品久久久天堂,亚洲中文久久精品无码照片